User`s manual

MGate MB3000 User’s Manual Configuring the Modbus Gateway
4-2
Starting MGate Manager
MGate Manager is a Windows-based utility that is used to configure the MGate MB3000. If you
have not already installed MGate Manager, please do so by referring to Chapter 2, Getting Started.
Before running MGate Manager, make sure that your PC and the MGate MB3000 are connected to
the same network. Alternatively, the MGate MB3000 may be connected directly to the PC for
configuration purposes. Please refer to Chapter 2, Getting Started, for more details.
You may open MGate Manager from the Windows Start menu by clicking Start Æ Programs Æ
MGate Manager Æ MGate Manager. The MGate Manager window should appear as shown
below.
Change Language Setting
If you wish to run MGate Manager in a different language, you may click Language to change the
language setting. A dialog box showing the available languages should appear as shown below.
When you click OK, MGate Manager will immediately reflect your chosen language.