User`s manual

MGate MB3000 User’s Manual Getting Started
2-9
7. A message will indicate that MGate Manager is successfully installed. You may choose to run
it immediately by selecting Launch MGate Manager.
8. You may also open MGate Manager through Start Æ Programs Æ MGate Manager Æ
MGate Manager, as shown below.
Mounting the Unit
DIN-Rail
You can use attachments so the unit can be mounted on a DIN-rail, as shown below.
STEP 1:
There are two plates on either side of the
unit for mounting purposes. On each side,
fasten the DIN-rail attachments to the plate
using two screws. Make sure that the
attachments are oriented as shown in the
diagram.
⇒