User`s manual

MGate 4101-MB-PBS UM Quick Configuration
A-2
Typical Applications
Here is a typical application to demonstrate how to use the Quick Link function and explain how QuickLink
works.
First of all, we are assuming there is a legacy Modbus master in the original application and the Modbus master
is running. After MGate 4101-MB-PBS connects to Modbus master, the MGate 4101-MB-PBS acts as a Modbus
slave to learn Modbus requests from the master automatically.
After some time, MGate 4101-MB-PBS will fully learn the requests from the Modbus master. Through this
QuickLink process, the MGate 4101-MB-PBS can replace the legacy Modbus master. Moreover, the MGate
4101-MB-PBS can respond to all of the Modbus slaves correctly.
NOTE
QuickLink is enabled with the MGate 4101
-MB-PBS is in master mode only. Please set the MGate 4101-MB-
PBS
in master mode before you use the QuickLink function.