User`s manual

MGate 4101-MB-PBS UM Configuration
4-22
Load Default
If for some reason you would like to clear all the settings of the unit, the load default button will reset the unit
to its initial factory default values.
Click Load Default and review the confirmation message. If you are sure you would like to reset the
configuration to the factory default, click the OK button. If not, click Cancel.
After the MGate Manager resets completely, MGate Manager will automatically execute a Broadcast Search for
all MGate units on the LAN and the recording COM port. Your MGate should reappear in the list of units.
ATTENTION
Load Default will completely reset the configuration of the unit, and all of the parameters you have saved will
be discarded. Do not use this function unless you are sure you want to completely reset your unit.