User`s manual

MC-4510-C23 Hardware Connection Description
3-6
PS/2 Connector Pin No. Signal Definition
1 PS/2 Keyboard Data
2 PS/2 Mouse Data
3 GND
4 VCC
5 PS/2 Keyboard Clock
6 PS/2 Mouse Clock
Use the Y-type cable to convert the mini-DIN connector into two 6-pin mini-DIN connectors to connect both a
PS/2 keyboard and PS/2 mouse at the same time. You may also use the USB ports to connect your USB-based
keyboard and mouse.
ATTENTION
Please note that without a Y-type cable, the PS/2 connector on the MC-4510-C23 can only work with a PS/2
keyboard. A PS/2 mouse will not function when directly connected to the PS/2 connector on the MC-4510-
C23
computer.
Connecting to the USB Device
The MC-4510-C23 comes with 6 USB 2.0 hosts on the front panel.. The hosts can be used for an external flash
disk or hard drive for storing large amounts of data. You can also use these USB hosts to connect to a keyboard
or a mouse.
Connecting to a VGA Monitor
The MC-4510-C23 comes with a D-Sub 15-pin female connector on the front panel to connect a VGA CRT
monitor. To ensure that the monitor image remains clear, be sure to tighten the monitor cable after connecting
it to the MC-4510-C23. The pin assignments of the VGA connector are shown below.