User`s manual

2
2. Getting Started
This chapter explains how to install a Moxa DSL Ethernet extender for the first time. There are three ways to
access the configuration settings: serial console, Telnet console, and web console. If you do not know the DSL
Ethernet extender’s IP address, you can open the serial console by connecting the DSL Ethernet extender to a
PC’s COM port with a short serial cable. You can open the Telnet or web console over an Ethernet LAN or over
the Internet.
The following topics are covered in this chapter:

Serial Console Configuration (115200, None, 8, 1, VT100)

Configuration via Telnet Console

Configuration via Web Browser

Disabling Telnet and Browser Access