User`s manual

Moxa Managed DSL Ethernet Extender Featured Functions
3-14
Link-Local Address
Setting Description Factory Default
None The network portion of the Link-Local
address is FE80 and the
host portion of the Link-Local address is automatically
generated using the modified EUI-64 form of the interface
identifier (DSL Ethernet extender’s MAC address)
None
Neighbor Cache
Setting Description Factory Default
None The information in the neighbor cache that includes the
neighboring node’s IPv6 address, the corresponding Link-
Layer
address, and the current state of the entry.
None
System Time Settings
The Moxa DSL Ethernet extender has a time calibration function based on information from an NTP server or
user specified time and date. Functions such as automatic warning emails can therefore include time and date
stamp.
NOTE
The Moxa DSL Ethernet extender does not have a real time clock. The user must update the Current Time and
Current Date to set the initial time for the Moxa DSL Ethernet extender after each reboot, especially when there
is no NTP server on the LAN or Internet connection.
Current Time
Setting Description Factory Default
User-specified time Allows configuration of the local time in local 24-hour format. None
Current Date
Setting Description Factory Default
User-specified date Allows configuration of the local date in yyyy-mm-dd format. None