User`s manual

Moxa Managed DSL Ethernet Extender Featured Functions
3-6
Web Auto-logout (S)
Setting Description Factory Default
60 to 86400 (seconds) Disable or extend the auto-logout time for the web
management console.
0 (disabled)
Age Time (S)
Setting Description Factory Default
15 to 3825 (seconds) The length of time that a MAC address entry can remain in
the
Moxa DSL Ethernet extender. When an entry reaches its aging
time, it “ages out” and is purged from the DSL Ethernet
extender, effectively cancelling frame forwarding to that
specific port.
300
CPU Loading
Setting Description Factory Default
Read-only T
he CPU usage volume in the past 5 seconds, 30 seconds, and
5 minutes
None
Free Memory
Setting Description Factory Default
Read-only The immediately free memory of the DSL Ethernet extender None
Password
The Moxa DSL Ethernet extender provides two levels of configuration access. The admin account has
read/write access of all configuration parameters, and the user account has read access only. A user account
can view the configuration, but will not be able to make modifications.
ATTENTION
By default, a password is not assigned to the Moxa DSL Ethernet extender’s web, Telnet, and serial consoles.
If a password is assigned, you will be required to enter the password when you
open the seri
al console, Telnet
console, or w
eb console.
Account
Setting Description Factory Default
Admin This account can modify the Moxa DSL Ethernet extender’s
configuration.
admin
User This account can only view the Moxa DSL Ethernet extender’s
configurations.