User`s manual

Moxa Managed Ethernet Switch/Extender MIB Groups
A-2
dot1dTpHCPortTable
dot1dTpPortOverflowTable
pBridgeMIB
dot1dExtBase
dot1dPriority
dot1dGarp
qBridgeMIB
dot1qBase
dot1qTp
dot1qFdbTable
dot1qTpPortTable
dot1qTpGroupTable
dot1qForwardUnregisteredTable
dot1qStatic
dot1qStaticUnicastTable
dot1qStaticMulticastTable
dot1qVlan
dot1qVlanCurrentTable
dot1qVlanStaticTable
dot1qPortVlanTable
The Moxa switch also provides a private MIB file, located in the file Moxa-[switch’s model name]-MIB.my
on the Moxa switch utility CD-ROM.
Public Traps
• Cold Start
• Link Up
• Link Down
• Authentication Failure
• dot1dBridge New Root
• dot1dBridge Topology Changed
Private Traps
• Configuration Changed
• Power On
• Power Off
• Traffic Overloaded
• Turbo Ring Topology Changed
• Turbo Ring Coupling Port Changed
• Turbo Ring Master Mismatch
The standard MIB groups that the Moxa DSL Ethernet Extender supports are as follows
MIB II.1—System Group
sysORTable
MIB II.2—Interfaces Group
ifTable
MIB II.4 – IP Group
ipAddrTable
ipNetToMediaTable
IpGroup
IpBasicStatsGroup
IpStatsGroup
MIB II.5—ICMP Group
IcmpGroup