Specifications

Total Solutions for Industrial Device Networking
9-5
Remote I/O Servers
www.m o x a . c o m e - m a i l : i n f o @ m o x a . c o m
9
Remote I/O Servers
Selection Guide
Digital Input/Output
Model E2212 E2210
Input
Channels 8 12
Modes
DI or Event Counter
(Event Counter up to 900Hz,
configurable filtering time)
DI or Event Counter
(Event Counter up to 900Hz,
configurable filtering time)
Dry Contact Yes Yes
Wet Contact
Source type, 24 VDC
PNP/NPN sensor selectable
Source Type, 24 VDC
Isolation 3K VDC 3K VDC
Output
Channels 8 8
Modes
DO or Pulse Output
(Pulse Output up to 1 KHz,
hi/lo width configurable)
DO or Pulse Output
(Pulse Output up to 1 KHz,
hi/lo width configurable)
Current 200 mA/channel 200 mA/channel
Protection
Over current limit, over
temperature shutdown
Over current limit, over
temperature shutdown
Configurable DI/DO,
Channel
4 -
Comm.
Interface 10/100 Mbps Ethernet
Protocols Modbus/TCP, Bootp, DHCP, SNMP, HTTP, SNTP
Security IP Filtering
LCD display Optional
Click&Go Logic
Yes
Analog Input/Output
Model E2240
Input
Channels 8
Resolution 16 bit
Modes
±150 mV, ±500 mV, ±5V,± 10 V,
0 to 20 mA, 4 to 20 mA
Sampling
Rate (All
Channels)
Voltage: 10 samples/sec
Current: 6 samples/sec
Isolation 3K VDC
Output
Channels 2
Resolution 12 bit
Modes 0 to 10 V, 4 to 20 mA
Accuracy
+/- 0.1%FSR @ 25°C,
+/- 0.3%FSR @ -10, 60°C
Comm.
Interface 10/100 Mbps Ethernet
Protocols
Modbus/TCP, Bootp, DHCP,
SNMP, HTTP, SNTP
Security IP Filtering
LCD display Optional
Click&Go Logic
Yes
ioLogik E2000 Series Active Ethernet I/O Servers