Specifications

9-26
Remote I/O Servers
Remote I/O Servers
www.m o x a . c o m e - m a i l : i n f o @ m o x a . c o m
9
E2240
LAN
Ethernet: 10/100 Mbps, RJ45
Protection: 1.5 KV magnetic isolation
Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP(MIB for I/O
and Network), HTTP, SNTP
Active I/O Messages: Yes
Security: IP-filtering
Serial
Interface: RS-485 (2-wire): Data+, Data-, GND
Serial Line Protection: 15 KV ESD for all signals
Serial Communication Parameters
Parity: None
Data Bits: 8
Stop Bits: 1
Flow Control: None
Speed: 1200 to 115200 bps
Protocol: Modbus/RTU
Built-in RTC: Yes
Power Requirements
Power Input: 24 VDC nominal, min. 12VDC, Max. 48VDC
Power Consumption: 282 mA @ 24V DC (typ.)
DO Power: 24 VDC nominal, up to 36 VDC
Mechanical Specifications
Wiring: I/O cable max. 14 AWG
Environment
Operating Temperature: -10 to 60°C (14 to 140°F), 5 to 95%RH
Storage Temperature: -40 to 85°C (-40 to 185°F), 5 to 95%RH
Shock: IEC60068-2-27
Active Ethernet I/O Server with 8 Analog Inputs, 2 Analog Outputs
Features
Actively transfer I/O data in real-time over Ethernet
Easy-to-use Click&Go™ Logic for local output control and
messaging
8-channel analog input for mV, voltage, current signal with wire-
off detection (at 4-20mA)
2-channel analog output for voltage, current actuator control
Connects up to 10 hosts
SNMP to I/O mapping that works with Network Management
System
Quick programming library for VB, VC, BCB
NIST-traceable calibration
Specifications
Introduction
Linking Analog Inputs and Outputs to TCP/IP Ethernet
Networks
The ioLogik E2240 is designed for system integrators to acquire
and control remote sensors and actuators remotely over TCP/IP
and Ethernet networks. Types of sensors and actuators include pH,
conductivity, temperature, humidity, pressure, flow, actuator, and
valves. The ioLogik E2240 supports Ethernet and can run multiple
protocols, such as Modbus/TCP, SNMP, HTTP, TCP, UDP at 100 Mbps
for high speed data acquisition. Data can be distributed to up to 10
host computers.
Independent Configuration for Multi-Functional AI and AO
Channels
Each analog input can be independently configured by software to
voltage or current mode. The analog input channels support various
signals ranging from +/-150 mV to +/-10V at 16-bit resolution.The
analog output channels support 0 to 10V and 4 to 20 mA @ 12-bit
resolution.