Specifications

9-22
Remote I/O Servers
Remote I/O Servers
www.m o x a . c o m e - m a i l : i n f o @ m o x a . c o m
9
E2212
LAN
Ethernet: 10/100 Mbps, RJ45
Protection: 1.5KV magnetic isolation
Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP(MIB for I/O
and Network), HTTP, SNTP
Active I/O Messages: Yes
Security: IP-filtering
Serial
Interface: RS-485 (2-wire): Data+, Data-, GND
Serial Line Protection: 15 KV ESD for all signals
Serial Communication Parameters
Parity: None
Data Bits: 8
Stop Bit(s): 1
Flow Control: None
Speed: 1200 to 115200 bps
Protocol: Modbus/RTU
Power Requirements
Power Input: 24 VDC nominal, min. 12 VDC, Max. 48 VDC
DO Power: 24 VDC nominal, up to 30 VDC
Mechanical Specifications
Wiring: I/O cable max. 14 AWG
Environment
Operation Temperature: -10 to 60°C (14 to 140°F), 5 to 95% RH
Storage Temperature: -40 to 85°C (-40 to 185°F), 5 to 95% RH
Digital Input
Channels: 8 fixed points
Sensor Type: 2 6-point groups for NPN/PNP type
I/O Mode: DI or Event Counter (up to 900Hz)
Dry Contact: Logic 0: short to GND, Logic 1: open
Wet Contact: Logic 0: 0 to 3 VDC,
Logic 1: 10 to 30 VDC (DI COM to DI)
Common Type: 6 points /1 COM
Isolation: 3K VDC
Active Ethernet I/O Server with 8 DI, 8 DO, and 4 DIO
Features
Selectable digital I/O combination by software
Accepts PNP or NPN sensors
Instant event reporting by TCP/UDP/e-mail/SNMP trap
Easy local control without programming by patented Click&Go
logic
Windows VB and Windows/WinCE/Linux C API
Peer-to-Peer I/O without controller
Specifications
Introduction
Flexible digital input/output configuration within one Ether-
net DIO
The ioLogik E2212 provides system integrators with the flexibility
to handle various field demands with 8 fixed input channels, 8 fixed
output channels, and 4 channels that can be configured by software for
input or output operation. You can configure the I/O channels to suit
your needs, for combinations such as 12 inputs/8 outputs, 8 inputs/12
outputs or 10 inputs/10 outputs.
Single Ethernet DIO that accepts 3 types of sensors
Unlike traditional Ethernet I/O products, the ioLogik E2212 can connect
to dry contact, PNP, and NPN sensors at the same time. You may
decide on the sensor type depending on your wiring approach.