Specifications

5-6
www.moxa.com
[e-mail]
Remote Monitoring Solutions
Industrial I/O >
Introduction to Industrial I/O
5
The ioLogik E4200 series of Modular Active
Ethernet I/O products come with dual network
interfaces, which have separate MACs and
IP addresses to connect to different network
segments. Redundancy can be easily
implemented to improve system reliability by
allowing hosts located on different networks to
control or monitor your system.
Solution-oriented Design
The ioMirror E3000 series of Ethernet I/O
products are designed as cable replacement
solutions that send input signals to remote
outputs over an IP network. ioMirror products
can be used to connect remote sensor signals to
PLC controllers, DCS systems, or display devices
over a network, without installing additional
signal wires.
The ioLogik 4000 provides spring type,
removable terminal blocks (RTBs) that allow you
to preserve field wiring before replacing an I/O
expansion module. Each I/O expansion module
can be replaced quickly and easily.
ioLogik remote I/O products come with a very
user-friendly Windows utility that includes
remote configuration, firmware updates, and
I/O testing and monitoring functions. These
functions can save you many hours of installation
and troubleshooting, and all settings can be
saved to a file for future reference.
The ioLogik 2000 series of stand-alone remote
I/O products provides an optional LCD module
for on-site management and configuration. The
unique display module can display network and
I/O settings. You can change network settings
to ensure the speed of installation and future
maintenance.
Dual-LAN Redundancy
Dual-LAN Redundancy
LAN 1
Primary Host
Backup Host
LAN 2
Intuitive Windows Utility
Intuitive Windows Utility
Optional LCD Module
Optional LCD Module
Peer-to-Peer Communication over Ethernet
Peer-to-Peer Communication over Ethernet
Easy Expansion with Slice-type Modules
Easy Expansion with Slice-type Modules
Slice Type I/O Modules Spring Type Terminal Block