Specifications

5-26
www.moxa.com
[e-mail]
Remote Monitoring Solutions
Industrial I/O >
LDP1602 LCD Module
5
Snap-on module for the ioLogik 2000 and ioMirror 3000 series
1. Remove the ioLogik’s top cover. 2. Plug in the LCD module.
3. Check and confi gure the IP address. 4. Check IP and I/O status.
Hot-pluggable display module for ioLogik Active Ethernet I/O, ›
serial I/O, and Peer-to-Peer I/O
Easy, portable confi guration kit for IP display and confi guration ›
Direct display for analog value and digital input, counter status ›
No battery required (powered through the I/O ) ›
LDP1602 LCD Module
Installing the LCD Module
Specifi cations
Ordering Information
LCD Screen: 16 x 2 text display (in English)
Operating Temperature: 0 to 55°C (32 to 131°F)
Storage Temperature: -20 to 70°C (-4 to 158°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
LDP1602: LCD module with 16 x 2 text display and 5 buttons
The certifi cation logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifi cations” below.