Specifications

Industrial Networking Solutions
5-25
[e-mail]
www.moxa.com
5
Industrial I/O >
NA-4010
Ethernet network adaptor
NA-4010
ioLogik 4000
Modbus TCP/IP
NA-4010
SYS
LINK
ACTIVE
I/O
Field
Power
0 1
2 3
4 5
6 7
SG
Field Power (0 VDC)
Field Power (24 VDC)
SG
24V
0V
0V 0V
24V 24V
System Power (0 VDC)
System Power (24 VDC)
Field Power (0 VDC)
Field Power (24 VDC)
Shielding Ground
System Power (5 VDC)
System Power (GND)
System Bus
Non-isolation
Switching
Power
Specifi cations
Ordering Information
NA-4000 series
M-1000/2000/3000/4000/6000
series
M-7000 series
Step 1: Select a network adaptor module
Step 2: Select I/O modules Step 3: Select power modules (optional)
LAN
Ethernet: 1 x 10/100 Mbps, RJ45
Software Features
Protocols: Modbus/TCP, HTTP, Bootp
IP Settings: ARP, Bootp, static IP
Utility: ioAdmin
Programming Library: MXIO DLL library for Windows supporting
Visual Basic, Visual C++, Borland C++ Builder, .NET
Number of I/O Modules Supported: Max. of 32
Power Requirements
Power Input: 11 to 28.8 VDC, 24 VDC typical
Power Consumption: 60 mA typical @ 24 VDC
Current for I/O Modules: Max. 1.5A @ 5 VDC
Field Power
Rated Voltage: 11 to 28.8 VDC, 24 VDC typical
Current in Field Power Contact: Max. 10 A
Isolation
System Power to I/O Driver: Optical isolation
Physical Characteristics
Dimensions: 42 x 99 x 70 mm (1.65 x 3.9 x 2.75 in)
Weight: 150 g
Environmental Limits
Operating Temperature: -10 to 60°C (14 to 140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory Approvals
Safety: UL508
EMC: CE IEC 61000-6-2, IEC 61000-6-4
Vibration: IEC-68-2-6 (2 g’s during operation)
Warranty
Warranty Period: 2 years
Details: See www.moxa.com/warranty
The certifi cation logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifi cations” below.
Available Models
NA-4010: Ethernet network adaptor (Modbus/TCP)
Note: The NA-4010 Ethernet network adaptor can be expanded by adding up to 32 I/O modules. See pages 5-33 to 5-41 to select the M- series modules for your application.