Specifications

5-14
www.moxa.com
[e-mail]
Remote Monitoring Solutions
Industrial I/O >
Click&Go
5
Click&Go
TM
Provides Time-based Scheduler and Timer Control
Click&Go™ Function Comparison
Click&Go™ Support Versions
Input-to-Output Control over IP Networks
Click&Go™ can be scheduled to perform user defined tasks such as
output control, remote actions, and active messaging. This function
Click&Go™ is now available on all ioLogik products, recent function improvements are shown in the table at the right.
To use the latest version of Click&Go™, simply upgrade the ioLogik’s
firmware. But first, be sure to download the latest configuration utility
before proceeding to update the firmware.
Click&Go
TM
enables direct input-to-output control over IP networks,
without the need for additional PCs. That is, when used in pairs, the
ioLogik E2000 units can talk directly to each other, and digital inputs
can be reproduced at a remote location over the network. Local analog
inputs can also be referenced for remote digital outputs. A typical
application can be found in water pumping systems where analog
inputs that measure the water level are referenced to activate the
pumps On/Off control. By cross referencing the scheduler, less energy
will be used to operate the water pumping system.
Water Level Sensor
Ethernet
ioLogik E2240
ioLogik E2210
DO
AI
Energy Savings for Water Pumping Systems
ioLogik Model E2210 E2212 E2214 E2240 E2242 E2260 E2262 E4200 W5340
Confi guration
Utility
ioAdmin
V3.0
↑
ioAdmin
V3.0
↑
ioAdmin
V3.0
↑
ioAdmin
V3.1
↑
ioAdmin
V3.1
↑
ioAdmin
V3.1
↑
ioAdmin
V3.1
↑
modular
ioAdmin
V1.0
↑
ioAdmin
V3.2
↑
Firmware
V3.0↑ V3.0↑ V3.0↑ V3.0↑ V3.0↑ V3.0↑ V3.0↑ V1.0↑ V1.0↑
Improvements in Programming Method and Rules
Programming Method Programming Rules
Click&Go V1.x IF-THEN 16 Rules
Click&Go V2.x IF-THEN-ELSE 24 Rules
Function Support
Click&Go V1.0 Click&Go V1.1 Click&Go V2.x
Input Monitor and Output Control √√√
Counter Monitor and Reset √√√
Timer Trigger √√---
Delay Timer --- √ ---
Timer --- --- √
Internal Register --- √√
Remote Action --- --- √
Schedule --- --- √
SNMP Trap √√√
Active Messaging √√√
Email √√√
CGI Commands --- --- √
is useful when applied to energy savings, lighting control, and water
pumping systems. The timer function allows users to set a delay
period for actions, which is particularly useful when used with alarm
systems for which users need an authentication period to avoid false
alarms.