Specifications

5-12
www.moxa.com
[e-mail]
Remote Monitoring Solutions
Industrial I/O >
Active OPC Server Lite
5
Dynamic IP/WAN Connection
Automatic Tag Generation
Unlike the fixed IP requirements of Ethernet I/O with a traditional
OPC server, Active OPC Server Lite and ioLogik products provide the
flexibility of configuring the ioLogik to use dynamic IP addresses.
The ioLogik connects directly to the Active OPC Server Lite instead of
being polled, which makes dynamic IP addressing and WAN Access
to the Ethernet I/O device possible, and adds even greater flexibility by
allowing connections across firewalls. I/O devices for traditional data
acquisition applications are not capable of using this approach.
Active OPC Server Lite and ioLogik series products support “Auto Tag
Generation,” which eliminates the headache of specifying target IP
addresses, I/O channels, and data formats one by one, or editing and
importing configuration text files, since Active OPC Server Lite creates
the tags for the target ioLogik automatically. Simply select the channels
that you need to update, and the tags are generated and configured
automatically. Generally speaking, tag generation is 50 times faster
with Active OPC Server Lite than with traditional OPC server packages.
One of the biggest payoffs is that users will no longer need to be
trained to install and configure your OPC.
Hardware Requirements
CPU: Intel Pentium (Pentium 4 or above)
RAM: 512 MB (1024 MB recommended)
Network Interface: 10/100Mb Ethernet
Software Requirements
Operating System: Microsoft Windows 2000/XP/2003
Editor (optional): Microsoft Offi ce 2003 (Access 2003) or above
OPC Server Specifi cations
OPC Data Access: 1.0a, 2.0, 2.05a, 3.0
Max. No. of Tags: 256
Specifi cations
Ordering Information
Software Versions and Model Support Table
Available Models
Active OPC Server Lite: Free software package for integrating with SCADA/HMI systems
Can be used with the following products
Active Ethernet I/O: ioLogik E2210/E2212/E2214/E2240/E2242/E2260/E2262 Series
Modular Active Ethernet I/O: ioLogik E4200
Cellular GPRS I/O: ioLogik W5340
ioLogik Model Name E2210 E2212 E2214 E2240 E2242 E2260 E2262 E4200* W5340*
Active OPC Server Lite
V1.0
↑ V1.0↑ V1.0↑ V1.1↑ V1.1↑ V1.1↑ V1.1↑ V1.3↑ V1.2↑
Confi guration Utility
ioAdmin
V3.0
↑
ioAdmin
V3.0
↑
ioAdmin
V3.0
↑
ioAdmin
V3.1
↑
ioAdmin
V3.1
↑
ioAdmin
V3.1
↑
ioAdmin
V3.1
↑
Modular ioAdmin
V1.1
↑
ioAdmin
V3.2
↑
Firmware
V3.0
↑ V3.0↑ V3.0↑ V3.0↑ V3.0↑ V3.0↑ V3.0↑ V1.1↑ V1.0↑
Push-based Active OPC Server
Active OPC Server Router
Remote I/O Remote I/O Remote I/O
ioLogikRouter
Internet and Dynamic IP
Connection
Pull-based OPC Server
General OPC Server
Local Network and Fixed IP Connection only
Polls continuously
No polling required
Remote
I/O
i
oLo
g
i
k
ioLogik
It takes 5 seconds to create 20 or more tags
It takes 2.5 min.
to create only
1 tag
General OPC Server
Create Tags
Create Tags
5 steps for channels, interfaces, and protocol definition: takes 20 seconds.
13 steps for device, IP address, and other communication parameters: takes 30 seconds.
Select channels and press button to update configuration: takes 5 seconds.
1 step for looking up address table: takes 100 seconds.
Active OPC Server
i
oLo
g
ik
.
nds
*Note: The version numbers for these models are preliminary. Please see Moxa’s website for the most up-to-date information.