User`s manual

3-20 Intellio CP-204J User’s Manual
Configuring Board and Port
If you already have installed the driver and want to re-configure the Intellio CP-204J
board under Windows 95/98, the following is the procedure for you.
1. Click on the Taskbar [Start] button, then select [Programs] menu, then
[
MOXA Utilities] menu and then [MOXA Configuration Panel] icon. The
configuration panel will be popped up as below.
l Click [OK] button to confirm the configuration changes you made.
l Click [Cancel] button to leave the dialog with the configuration unchanged.
l The [Add] button is not applicable in PCI case. A new Intellio CP-204J
board will be automatically found as new hardware and added during the
Windows 95/98 startup.
l Click [Remove] button is not applicable in PCI case. Simply unplugging the
undesired
Intellio CP-204J board physically from the system is the best way
to do.
l Click [Property] button to bring up the following “Property” dialog box to
setup the selected board with correct “COM Number”. Note that “Board
Type”, “Memory Bank”, “Interrupt No.” and “Total Ports” of the
Intellio
CP-204J can not be changed.