User`s manual

Software Installation
Intellio CP-204J User’s Manual 3-19
Once the installation is finished, error conditions of the board, if any, will then be
popped up onto the screen. Otherwise, everything should be fine.
If error message like “MOXA CP-204J (BusNo=x, DevNo=x) at base memory
[xxxxxxxx] interrupt failure!” shows, refer to Chapter “Troubleshooting” for
solutions.
Note ! Up to now, the driver installation of Intellio CP-204J is complete
and successful including the board and port configuration
.
However, if changes of the board and port configuration are needed,
please refer to the next section “Configuring Board and Port” for more
configuration details.
Note ! Once the board and driver are installed and the driver restarts
successfully, you can start to develop applications by using
PComm
library (See Chapter “Serial Programming Tools”) or using Microsoft
Win32 API. Also you can execute any ready-made application such as
PComm utility Terminal emulator (See Chapter “Serial Programming
Tools”) or HyperTerminal to transmit/receive data as well as Remote
Access Service to provide dial-up networking capability.
If multiple boards are installed at the same time, from the second board, same
scenario occurs except that no driver diskette is asked any more.
Similarly, if you want to add more board and the driver has been installed before,
simply plug the
Intellio CP-204J board and Windows 95/98 will automatically
detect and install the required driver.