User`s manual

Software Installation
Intellio CP-204J User’s Manual 3-15
Port Configuration Stage
Next, Windows 95/98 will show “CP-204J Installation” dialog box to enter port
configuration stage. The most important thing to do in this stage is to map MOXA
ports to system COM numbers.
In the “MOXA Ports Installation” dialog, you may have two ways to map the
physical ports to COM numbers depending on the check box “
Auto Enumerating
COM number
”.
l Sequential Port Mapping: (Enable “Auto Enumerating COM Number”)
Specify the COM number of the first port and subsequent ports are mapped to
continuous COM numbers. For instance, if first port is mapped to COM10, then
second port is mapped to COM11 sequentially.
l Non-sequential Port Mapping: (Disable “Auto Enumerating COM Number”)
Specify the COM number for individual port. For instance, the second port can
be out of sequence, say COM18, while the first port is mapped to COM10.