User`s manual

Software Installation
Intellio CP-204J User’s Manual 3-9
In this configuration panel, you may:
l Click [Property] to enter “Property” dialog box to configure the selected board
with the correct “COM Number”. Please see
steps 6 to 8 in the previous section,
“Installing Driver”, for more details, except that the “Board Type” field is not
supposed to be changed.
l Click [Add] to add one more board that is not yet configured in the system. Up
to four of
Intellio CP-204J boards can be installed together as long as the IRQ
resources are sufficient and available in a system. Please see
steps 6 to 8 in the
previous section, “Installing Driver”, for more details.
l Click [Remove] to remove the board currently selected from the configured
board list.
l Click [OK] to confirm the configuration changes you made.
l Click [Cancel] to leave the dialog box with the configuration unchanged.
Updating Driver
To update driver, you have to remove the installed driver first as described later and
install the new one.
Removing Driver
1. From [Control Panel], open [Network] icon and then select [Adapters] tab.
2. Select “MOXA C218Turbo/CP-204J Adapter” in adapter list, then click on
[
Remove] button and the [OK] button to remove the driver.
3. Restart the system to activate the new configuration.