User`s manual

Software Installation
Intellio CP-204J User’s Manual 3-7
11. After system restarted, you may check the event log issued by MOXA driver to
see if the ports of the board are initialized successfully.
l Enter [Administrative] group, then open [Event Viewer] icon and then
select [
Application Event Log] item to check for successful message like
“MOXA CP-204J Multiport Board #1: addr(xxxxxxxx) O.K.” for each
configured board.
l If error message is like “MOXA CP-204J Multiport Board #1
addr(xxxxxxxx): IRQ(x) test failure!”, refer to the chapter
“Troubleshooting” for solutions.
Note ! Once the board and driver are installed and the system restarts
successfully, you can start to develop applications by using
PComm
library (See Chapter “Serial Programming Tools”) or using
Microsoft Win32 API. Also you can execute any ready-made
application such as
PComm utility Terminal emulator (See Chapter
“Serial Programming Tools”) or HyperTerminal to transmit/receive
data as well as Remote Access Service to provide dial-up networking
capability.
Configuring Board and Port
If you already have installed the driver and want to re-configure the Intellio CP-
204J board and ports, add more boards or delete boards under Windows NT 4.0, the
following is the procedure for you.