Specifications

21
Chapter 5 For Windows 95 Users
In this chapter, software driver installation, configuration and removal procedure are
described. If it is necessary for you to develop your own applications, we strongly
recommend that try out the easy but powerful PComm serial comm tool, which includes
MOXA serial communication library for easy programming and utilities for diagnostic
and monitor. Finally, Windows 95-specific troubleshooting is included.
5.1 Driver Installation - Setup95.exe
1. Run Setup95.exe in the driver diskette.
2. Select "MOXA C102/C104/C168 Family Driver" to install the driver.
3. When MOXA C102_C104_C168 Configuration Panel is popped up, to
configure the board(s) and ports, please refer to the Section "Board and Port
Configuration" for more details.
After this, users already complete the whole installation.
4. Restart Windows 95.
5. Check the board initialization status after logging in the system. Refer to Section
"Board Initialization Status Check" for details.
5.2 Board and Port Configuration
You will enter the configuration program when installing the driver. Or you can
click on the Taskbar [Start] button, then select [Programs] menu, then [MOXA
Utilities] menu, and then [MOXA C102_C104_C168 Configuration Panel] icon.
When the configuration panel popped up:
Click [Add] button to add a board.
Click [Remove] button to remove a board.