Specifications

Software Installation l l Chapter 3

The screen will show:

You would like to install a:

1. 1 port card

2. 2 port card

3. 4 port card

4. ......

Enter number 3 to choose "4 port card". The screen then shows:

The card is configured as:

1. COM1

2. COM2

3. COM3

4. COM4

For first C114HI 4 port board, choose number 1 (COM1); for second, number 2

(COM2). Then the screen shows like:

Which card do you have?

1. Arnet base address 0xaaa

2. Arnet base address 0xbbb

3. Hostess base address 0xccc

4. ......

For first C114HI 4 port board, select "Arnet base address 0x280"; for second,

"Arnet base address 0x300". Follow the on-line instruction to complete the rest of

the installation procedure.

Once the installation is successfully completed, the following serial devices along

with their modem devices (upper-case) will be added to the system.

tty1a tty1b tty1c tty1d (first C114HI)

tty2a tty2b tty2c tty2d (second C114HI)

Be sure to activate the device by using SCO command:

# enable ttyxx

3.3 OS/2

The C114HI can be driven either by the default device driver accompanying with