User`s manual

3-22 Intellio C218Turbo User's Manual
In the “Basic Configuration” dialog, you should first press Enter in board type
field to select board type, C218Turbo. Then press Enter in Memory field to
select desired base memory bank.
2. Press PageDown to enter “getty Setting” sub-dialog, there are some noticeable
fields for initialize the port for getty usage. You may skip this step if you will not
use getty utility.
Non-Modem and Modem Baud Rate
This field stands for the initial baud rate symbol and hunt sequence for Non-Modem
/Modem tty. It is simply for setting parameters of getty entries in system file
/etc/inittab which could also be manually modified by system administrator. Its value
comes from the UNIX system “getty default” file, i.e., “/etc/gettydefs”. Modify this
field to suit your need.