User`s manual
Software Installation
Intellio C218Turbo User's Manual 3-9
In this configuration panel, you may:
Click [Property] to enter “Property” dialog box to configure the selected board
with the correct “Memory Bank”, “IRQ” and “COM Number”. Please see steps
6 to 8 in the previous section, “Installing the Driver”, for more details, except
that the “Board Type” field is not supposed to be changed.
Click [Add] to add one more board that is not yet configured in the system. Up
to four of Intellio C218Turbo boards can be installed together as long as the
memory and IRQ resources are sufficient and available in a system. Please see
steps 6 to 8 in the previous section, “Installing the Driver”, for more details.
Click [Remove] to remove the board currently selected from the configured
board list.
Click [OK] to confirm the configuration changes you made.
Click [Cancel] to leave the dialog with the configuration unchanged.
Updating Driver
To update driver, you have to remove the installed driver first as described later and
install the new one.
Removing Driver
1. From [Control Panel], open [Network] icon and then select [Adapters] tab.
2. Select “MOXA Intellio Family Adapter” in adapter list, then click on
[Remove] button to start removing one of the MOXA boards listed.
3. Repeat step 2 to remove the rest of the boards.