User`s manual

Software Installation
Intellio C218Turbo User's Manual 3-7
Note ! Please double check if all the C218Turbo components: Control
Board, link cable and external cable/box, are connected and fastened
tightly in order to ensure the system and driver will start successfully
later.
11. After system restarted, you may check the event log issued by MOXA drive to
see if the ports of the board are initialized successfully.
 Enter [Administrative] group, then open [Event Viewer] icon and then
select [Application Event Log] item to check for successful message like
“MOXA C218Turbo Multiport Board #1: addr(c8000) O.K.” for each
configured board.
 If error message is like “MOXA C218Turbo Multiport Board #1
addr(c8000) not found!” or “MOXA C218Turbo Multiport Board #1
addr(c8000): IRQ(10) test failure!”, refer to Chapter “Troubleshooting” for
solutions.
Note ! Once the board and driver are installed and the system restarts
successfully, you can start to develop applications by using PComm
library (See Chapter “Serial Programming Tools”) or using Microsoft
Win32 API. Also you can execute any ready-made application such
as PComm utility Terminal emulator (See Chapter “Serial
Programming Tools”) or HyperTerminal to transmit/receive data as
well as Remote Access Service to provide dial-up networking
capability.
Configuring Board and Port
If you already have installed the driver and want to re-configure the C218Turbo
board and ports, add more boards or delete boards under Windows NT 4.0, the
following is the procedure for you.