User`s manual

Software Installation
Intellio C218Turbo /PCI User's Manual 3-35
Setting MOXA Ports to Terminal
Following procedure is how to set the MOXA port to the “Terminal” for login
purpose, taking ttya11 as an example,
SCO UNIX/OpenServer/Open Desktop/XENIX
# enable /dev/ttya11
UNIX SVR4.2 and UnixWare
1. Edit (e.g. use vi editor) the file /etc/inittab.
2. Modify the tty entry from "ma11:23:off:/etc/getty ttya11 9600" to
"ma11:23:respawn:/etc/getty ttya11 9600".
3. # init q
Or refer to your UNIX system manuals for how to activate a tty port.