User`s manual

3-10 Intellio C218Turbo /PCI User's Manual
Windows 95/98
Windows 95/98 supports up to 128 serial ports, from COM1 to COM128. To fully
integrate the advanced features of Windows 95, multi-process and multi-thread, pure
32-bit Windows 95 virtual device port drivers (VxD) compliant with communication
driver (VCOMM) are developed for C218Turbo/PCI and other MOXA multiport
boards. The drivers conform to Win32 COMM API standard.
If you are the first time installer or you want to install more boards, please go
directly to the section “Installing Driver”.
If you already have installed the driver and want to re-configure the board, please
refer to the section “Configuring Board and Port”.
If you want to upgrade or even remove driver, please go to the section “Updating
Driver” and section “Removing Driver”.
If you want to remove boards, please simply unplug the undesired boards from the
system.
Installing Driver
If you are the first time installer or you want to install more board, this section is for
you.
You can easily plug the Intellio C218Turbo/PCI board and work right away with
little installation effort under Windows 95/98, which supports Plug and Play
capability. The Windows 95/98 will automatically detect the presence of the newly
plugged board and prompt you to install the software driver at the first time. In this
case, you need the driver diskette.
Up to four Intellio C218Turbo/PCI boards can be installed together as long as the
memory address and IRQ number resources are sufficient and available in a system.