User`s manual

Software Installation
Intellio C218Turbo /PCI User's Manual 3-9
Adding/Removing Board
Following is the procedure to add/remove Intellio C218Turbo/PCI boards after a
first time installation. Note that the presence of the board(s) is(are) required for
adding boards.
1. Power off the system.
2. Plug/unplug the boards in the system.
3. Power on the system.
4. Run the software configuration “MOXA Configuration Panel” to add/remove the
boards, detailed in the previous “Configuring the Board and Port” section.
Updating Driver
To update the driver for the Intellio C218Turbo/PCI board, simply remove the
driver, as described in the next section, and then reinstall it as detailed in the
“Installing Driver” section.
Removing Driver
To remove the driver for the Intellio C218Turbo/PCI board,
1. Open the [Control Panel], click on the [Network] icon and select the
[Adapters] tab.
2. Select “MOXA Intellio Family Adapter” in the adapter list, then click on the
[Remove] button and the [OK] button to remove the driver.
3. Restart the system to activate the new configuration.