User`s manual

3-8 Intellio C218Turbo /PCI User's Manual
3. Click on [Properties…] button to start the “MOXA Configuration Panel”
dialog.
In this configuration panel, you may:
 Click [Property] to enter “Property” dialog box to configure the selected
board with the correct “Total Ports” and “COM Number”. Please see
steps 6 to 8 in the previous section, “Installing Driver”, for more details,
except that the “Board Type” field is not supposed to be changed.
 Click [Add] to add one more board that is not yet configured in the system.
Up to four of Intellio C218Turbo/PCI boards can be installed together as
long as the memory and IRQ resources are sufficient and available in a
system. Please see steps 6 to 8 in the previous section, “Installing Driver”,
for more details.
 Click [Remove] to remove the board currently selected from the configured
board list.
 Click [OK] to confirm the configuration changes you made.
 Click [Cancel] to leave the dialog with the configuration unchanged.