User`s manual

Hardware Installation
Intellio C218Turbo /PCI User's Manual 2-3
Opt8C/Opt8D
Hold one end of the DB62 cable and plug it into the DB62 connector on the bracket
of the Intellio C218Turbo/PCI. Screw it carefully until it fits.
P1 P2 P3 P4
P6P5 P7 P8
Opt8C/Opt8D
Intellio
C218 Turbo/PCI
Opt8J/Opt8F/Opt8Z
Hold one end of the DB62 cable and plug it into the DB62 connector on the bracket
of the Intellio C218Turbo/PCI. Carefully screw it until it is tight. Then plug the
other end of the cable to the RS-422/RS-485 connection box's DB62 connector. Both
ends of the cable are identical. After that, don't forget to apply power via the adapter
to the Opt8J/F/Z.
Opt8F/Opt8Z/Opt8J
Intellio
C218 Turbo/PCI
If you can't make the Intellio C218Turbo/PCI work properly after installation,
please refer to Chapter “Troubleshooting”.
Refer to Chapter “Connection Option (Opt8x) and Cable Wiring” for RS-232/RS-
422/RS-485 cable wiring. And also to Chapter “Serial Programming Tools” for RS-
232/RS-422/RS-485 programming details.