User`s manual

Software Installation
Intellio C320Turbo User's Manual 3-35
Driver Loading
Having completed the setup, you can load the driver, “BIN\MX-DRV.EXE”, at the
DOS prompt. The driver will detect the Intellio C320Turbo automatically. If the board(s)
is(are) detected, a message similar to below will show:
API-232 Version x.x
MOXA Intellio ISA series communication driver
Setup driver …
C320 Turbo board 1: Bank [xxx] IRQ x Port [1-8]
Device driver setup O.K.
It means the Intellio C320Turbo driver is installed properly. At this point, you are
ready to execute application that supports API-232 functions, or start developing
applications using API-232 library.
If something went wrong, for instance, the board does not match the configuration or
the board is missing, the screen will show a message like:
API-232 Version x.x
MOXA Intellio ISA series communication driver
Setup driver …
C320 Turbo board 1: Bank [xxx] not found!
Driver execution failure!
It means the Intellio C320Turbo driver is not installed properly. Please refer to Chapter
“Troubleshooting” for possible reasons and solutions.
Driver Unloading
To unload (release) the Intellio C320Turbo driver from memory, type “MX-DRV/Q” at
the DOS prompt.