User`s manual

Software Installation
Intellio C320Turbo User's Manual 3-19
Then you will be prompted to shutdown the system on your own for
kernel rebuilding and you are recommended to do so.
Step 7. After system rebooted, please run “mxadm” to configure the board and
port settings.
Select and open “Basic Configuration” to do basic board and port
configuration. You may further optionally select and open “Advanced
Configuration” to do advanced settings.
Select and open “Board Reset” to reset the driver and board for the latest
configuration to take effect.
For more details, see later Section “Administration Utility “mxadm””.
Up to now, you have already completed the whole installation and the
Intellio C320 Turbo board is ready to work.
Note! Please double check if all the Intellio C320Turbo components:
Control Board, link cable and external modules, are connected
and fastened tightly in order to ensure the system and driver
will start successfully later.
Now you can run any ready-made applications such as getty terminal or
PPP/SLIP. Also you can start to develop applications by using Standard
UNIX library with MOXA extended UNIX Ioctl() Commands. (See Chapter
"Serial Programming Tools".)