User`s manual

3-18 Intellio C320Turbo User's Manual

Follow the instructions prompted to finish the driver installation

MOXA UNIX Device Driver Installation Ver. x.x

Please select one of the following OS:

1. SCO UNIX

2. UNIX SVR4.2

3. XENIX

Select:

Please select one of the devices where the driver diskette/files put:

1. /dev/fd0135ds18 (A: 1.44MB)

2. /dev/fd096ds15 (A: 1.2 MB)

3. /dev/fd1135ds18 (B: 1.44MB)

4. /dev/fd196ds15 (B: 1.2 MB)

5. Hard Disk /tmp/moxa

Select:

Step 6. Then the MOXA Multiport Board Installation Utility dialog will show for

driver installation. When finished, press any key to continue.

SCO UNIX, OpenServer or XENIX

Then you will be prompted to rebuild kernel at this moment and you are

recommended to do so unless you need to install other driver. Please type

“y”. After kernel rebuild, please shutdown the system on your own.

UNIX SVR4.2 or UnixWare or MITUX

Please type 1 for SCO UNIX 3.2.x, SCO OpenServer or

SCO Open Desktop. Type 2 for UNIX SVR4.2,

UnixWare or MITUX. Type 3. for XENIX.

Please type 1, 2, 3, 4 or 5.