User`s manual

Software Installation
Intellio C320Turbo User's Manual 3-17
UNIX
There are various UNIX operating systems, such as SCO UNIX, UNIX SVR4.2, and
Solaris, etc. Different types of UNIX drivers are required for different UNIXs. Moxa
supports device drivers currently for SCO UNIX, UNIX SVR4.2, XENIX and Solaris.
In this chapter, driver installation procedure is described. Administration utility,
mxadm, is explained, which is for configuration, monitor and terminal emulation.
Related issues such as device naming, baud rate settings and terminal enable are
stated.
If you are interested in UNIX serial programming, extended Ioctl() commands are
provided in the chapter “Serial Programming Tools ” for advanced programming.
UNIX-specific troubleshooting is included in the chapter “Troubleshooting”.
Installing Driver
At most 4 boards of combination of C320Turbo and C320Turbo/PCI can be installed
together as long as memory resources are sufficient and available in a system.
Step 1. Boot the system and login from the console as a super user (root).
Step 2. Insert driver diskette into a 1.44MB floppy drive, A: or B:.
If driver files are obtained from MOXA FTP service, put them under
/tmp/moxa directory and skip to step 5.
Step 3. Change to root directory by entering the following command:
# cd /
Step 4. Enter the following command to extract the install script file first.
# tar xvf /dev/fd0135ds18 /tmp/moxa/mxinstall (if 1.44MB A:)
Step 5. # /tmp/moxa/mxinstall