User`s manual

Software Installation
Intellio C320Turbo User's Manual 3-11
In this configuration panel, you may:
l Click on [Add] button to add one more board that is not yet configured in the
system. At most four of combination of Intellio C320Turbo Series boards can
be installed together as long as the memory resources are sufficient and
available in a system.
l Click on [Remove] button to remove the board currently selected from the
configured board list.
l Click on [OK] button to confirm the configuration changes you made.
l Click on [Cancel] button to leave the dialog with the configuration
unchanged.
l Click on [Property] button to bring up the following “Property” dialog to
setup the selected board with correct “Board Type”, “Memory Bank”, “IRQ”
and “COM Number”, where the possible parameters are as follows:
Board Type: C320 Turbo, C320 Turbo/PCI, C218Turbo, C218Turbo/PCI
Memory Bank: C8000, CC000, D0000, D4000, D8000, DC000
IRQ: 2, 3, 4, 5, 7, 10, 11, 12, 15. All C320 Turbo boards will share
one same IRQ number. Only one IRQ number is used for
multiple C320 Turbo boards.
COM Number: Mapping from the physical ports to COM numbers.