User`s manual

3-10 Intellio C320Turbo User's Manual
Windows 95/98
Windows 95/98 supports up to 128 serial ports, from COM1 to COM128. To fully
integrate the advanced features of Windows 95/98, multi-process and multi-thread,
pure 32-bit Windows 95/98 virtual device port drivers (VxD) compliant with
communication driver (VCOMM) are developed for Intellio C320Turbo and other
MOXA multiport boards. The drivers conform to Win32 COMM API standard.
If you are the first time driver installer, please go directly to the section “Installing
Driver”.
If you already have installed the driver and want to re-configure the board and port,
add more boards or delete boards, please refer to the section “Configuring Board and
Port”.
If you want to upgrade or even remove driver, please go to the section “Updating
Driver” and section “Removing Driver”.
Installing Driver
The following is the procedure for installing Intellio C320Turbo for the first time
under Windows 95/98:
1. Run Setup95.exe in the driver diskette.
2. Click on [Next>] button in the “Welcome ...” message dialog box. And then click
on [Next>] button in the “Ready ...” message dialog.
3. Click on [Finish] button in the “Complete ...” message dialog to enter the
configuration panel.
4. The “MOXA Configuration Panel” dialog will pop up for you to configure the
board and ports.