User`s manual

Software Installation
Intellio C320Turbo User's Manual 3-9
In this configuration panel, you may:
l Click [Property] to enter “Property” dialog box to configure the selected board
with the correct “Memory Bank”, “IRQ” and “COM Number”. Please see steps 6
to 8 in the previous section, “Installing Driver”, for more details, except that the
“Board Type” field is not supposed to be changed.
l Click [Add] to add one more board that is not yet configured in the system. Up to
four of Intellio C320Turbo boards can be installed together as long as the memory
and IRQ resources are sufficient and available in a system. Please see steps 6 to 8
in the previous section, “Installing Driver”, for more details.
l Click [Remove] to remove the board currently selected from the configured board
list.
l Click [OK] to confirm the configuration changes you made.
l Click [Cancel] to leave the dialog with the configuration unchanged.
Updating Driver
To update driver, you have to remove the installed driver first as described later and
install the new one.
Removing Driver
1. From [Control Panel], open [Network] icon and then select [Adapters] tab.
2. Select “MOXA Intellio Family Adapter” in adapter list, then click on [Remove]
button and [OK] button to remove the driver.
3. Restart the system to activate the new configuration.