User`s manual

Software Installation
Intellio C320Turbo User's Manual 3-7
Note ! Please double check if all the Intellio C320Turbo components: Control
Board, link cable and external cable/module, are connected and fastened
tightly to make sure that the system and the driver start successfully
later.
11. After system restarted, you may check the event log issued by MOXA drive to
see if the ports of the board are initialized successfully.
l Enter [Administrative] group, then open [Event Viewer] icon and then select
[Application Event Log] item to check for successful message like “MOXA
C320Turbo Multiport Board #1: addr(c8000) O.K.” for each configured
board.
l If error message is like “MOXA C320Turbo Multiport Board #1 addr(c8000)
not found!” or “MOXA C320Turbo Multiport Board #1 addr(c8000): IRQ(10)
test failure!”, refer to Chapter “Troubleshooting” for solutions.
Note ! Once the board and driver are installed and the system restarts
successfully, you can start to develop applications by using
PComm library (See Chapter “Serial Programming Tools ”) or
using Microsoft Win32 API. Also you can execute any ready-
made application such as PComm utility Terminal emulator (See
Chapter “Serial Programming Tools ”) or HyperTerminal to
transmit/receive data as well as Remote Access Service to provide
dial-up networking capability.
Configuring Board and Port
If you already have installed the driver and want to re-configure the Intellio C320Turbo
board and ports, add more boards or delete boards, please follow this procedure.