User`s manual

Intellio C320Turbo User's Manual 2-1
2
2
2 Hardware Installation
The installation of Intellio C320 Turbo consists of hardware installation and
software installation. For software installation, please refer to the respective section
of operating systems in the next chapter. Hardware installation is stated in this
chapter.
The Intellio C320Turbo hardware installation consists of Control Board installation
and external module installation. Make sure you have connected the Control Board
with proper number of external modules .
Installing the Intellio C320Turbo Control Board
Step 1: Turn off the PC's power.
Warning! Make sure your system is switched off before you start
installing any board. If you don't, you may risk damaging
your system and the board.
Step 2: Remove the PC's cover.
Step 3: Choose an IRQ number which is not used by other interface boards. There
are 9 IRQ numbers you can choose from at jumper JP1. If you are installing
more than one Intellio C320Turbo board, their IRQ numbers must be set to
the same number, i.e., multiple boards share only one IRQ.