User`s manual

5-14 Intellio C320Turbo User's Manual
C32020T Link Cable
There are two different types of link cables: 25-signal-pin link cable and 10-signal-
pin link cable. The former is used when there is no external power applied to the
external module (CPU/Basic Module). The latter is used when the external power is
applied to the external module (CPU/Basic Module) if you have chosen to use Long
Rang Extension Kit.
25-signal-pin Link Cable (standard)
The factory-supplied 2-meter link cable (the one with 25 signal pins) is used only
when you are NOT using the external power adapter. Pin assignments are given
below for this 25-pin link cable.
Warning! Do not use the factory-supplied 2-meter link cable (with 25 signal pins)
and the external power adapter at the same time, otherwise the Control
Board or CPU/Basic Module may be seriously damaged.
Pin No. Signal Pin No. Signal
1 GND 14 CLK-
2 DX+ 15 FSX+
3 DR+ 16 FSR+
4 GND 17 GND
5 GND 18 GND
6 GND 19 GND
7 -12V 20 +12V
8 +5V 21 +5V
9 +5V 22 +5V
10 +5V 23 +5V
11 CLK+ 24 FSX-
12 FSR- 25 DR-
13 DX-