User`s manual

Software Installation
Industio CP-132 Series User’s Manual
3-17
Configuring the Board and Ports
Follow the procedure given below if you would like to reconfigure the COM numbers of
ports for boards that are already installed under Windows 95/98.
Since this is a PCI board, once the board is added or unplugged, the configuration will be
automatically added or removed by the system.
1. Open the [Control Panel], click on the [System] icon, select the [Device Manager]
tab, and then select Moxa Smartio/Industio multiport board.
2. Click on the desired
CP-132U Series board entry, and then click the [Properties]
button.
3. Select the [Ports Configuration] tab.
4. Click on a specific port and then click the [Port Setting] button to re-assign the
desired COM number for the
Industio CP-132U Series port mapping.