User`s manual

Software Installation
Industio CP-132 Series User’s Manual
3-7
 If an error message similar to “Cannot find any configured MOXA CP-132
board!” appears, refer to the “Troubleshooting” chapter for solutions.
Note ! Once the board and the driver are installed and the driver restarts
successfully, you can start to develop applications with the PComm
PCommPComm
PComm library (see the
“Serial Programming Tools” chapter) or the Microsoft Win32 API. You can also
execute ready-made applications, such as PComm
PCommPComm
PComm utility Terminal emulator (see
“Serial Programming Tools” chapter) or HyperTerminal to transmit/receive data, as
well as Remote Access Service to provide dial-up networking capabilities.
Configuring the Board and Ports
The following steps explain how to re-configure the board’s ports:
1. In the [Control Panel], click on the [Network] icon and select the [Adapters] tab.
2. Select “MOXA
Smartio
SmartioSmartio
Smartio/Industio
IndustioIndustio
Industio Family Adapter” in “Network Adapters.”
3. Click on the [Properties] button to open the “MOXA Smartio/Industio
Configuration Panel” dialog box. See steps 8-9 in the previous section, “Installing the