User`s manual

Software Installation
Industio CP-132 Series User’s Manual
3-3
Installing the Driver
The following procedure is for installing the
Industio CP-132U Series driver for the first
time under Windows NT 4.0. Before taking these steps, make sure the board(s) have
already been plugged into the system’s PCI slot(s).
1. Log into NT as Administrator.
2. Open the [Control Panel], click on the [Network] icon, and select the [Adapters] tab.
3. Click on the [Add] button, then the [Have Disk...] button in the “Select Network
Adapter” dialog box.
4. Specify the exact path of the driver CD. For example, you would type
F:\WINDOWS.NT if your CD is drive F, and then click [OK].