Specifications

Transio Family
TransioTransio
TransioTransio
Transio A60
RS-232 Surge Protector
Surge voltage: 2KV
LED indicators for signal state
Non-powered
Weight: 68g
Dimension: 90mm x 60mm x 21mm
47
Controlled by RTS selectable
LED indicators for power and signal state
Support high-speed baudrate up to 921.6K bps
4-wire full duplex/2-wire half duplex selectable
Provide termination resistor position
Distance up to 4000ft (1.2km under 100K bps)
Optical isolation: 2KV (A51)
Power requirement: 9V ~ 30V, 150mA
Weight: 76g (A50), 80g (A51)
Dimension: 90mm x 60mm x 21mm
TransioTransio
TransioTransio
Transio 50/A51
RS-232 to RS-422/485 Bi-directional Converter
TransioTransio
TransioTransio
Transio A52/A53
Automatic Data Direction Control (ADDC), no baud
rate switch setting for RS-485
RS-485 data control modes: auto (ADDC) or by RTS
RS-422 hardware flow control: CTS, RTS signals
LED indicators for power and signal state
Over current protection when there are 2 signals shorted
together at RS-422/485 end
32 units connected together in RS-485 multidrop
operation
Surge protection: 25KV ESD
Optical isolation: 2KV (A53)
Built-in termination resistors
Power requirement: 9V ~ 30V, 350mA
Dimension: 90mm x 60mm x 21mm
A52/53
A50/51
A60
Smart RS-232 to RS-422/485 Bi-directional
Converter
Optional power adapter can supply up to 4 converters
NEW