User`s manual
Industio CP-114 User's Manual A-1
A
A
A
Technical Reference
Specification
v Bus interface: 32-bit PCI (Spec 2.1)
v Number of ports: 2 (RS-232 or RS-422/485), 2 (RS-422/485)
v I/O address: Assigned by BIOS
v IRQ: Assigned by BIOS
v Data bits: 5, 6, 7, 8
v Stop bits: 1, 1.5, 2
v Parity: None, even, odd, space, mark
v UART: 16C550C or compatible×4, each with 16byte Tx/Rx FIFO
v Speed (bps): 50 ~ 921.6K
v Connectors: DB9 (male)×4
v Data signals: RS-232-TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - TxD(B)+/(A)-, RxD(B)+/(A)-, RTS(B)+/(A)-,
CTS(B)+/(A)-, GND
RS-485-Data(B)+/(A)-, GND
v Isolation protection: Max. 2000V (CP-114I, CP-114IS)
v Surge protection: ESD 25KV (CP-114S, CP-114IS)
v Operating temp: 0 ~ 55 ℃
v Regulation Approval: CE, FCC Class A
v OS supported: Windows NT, Windows 95/98, DOS
v Termination resistor: RS-422: 120 Ohm
RS-485: 120 Ohm, jumper enable/disable
v Power requirement: CP-114: 720mA max. (+5V), 43mA max. (+12V), 31mA max.(-12V)
CP-114S: 735mA max. (+5V), 44mA max. (+12V), 33mA max.(-12V)
CP-114I: 1164mA max. (+5V), 35mA max. (+12V), 48mA max.(-12V)
CP-114IS: 1170mA max. (+5V), 36mA max. (+12V), 49mA
max.(-12V)
v Dimensions: CP-114/CP-114S: 135 mm×110 mm
CP-114I/CP-114IS: 160 mm× 120 mm
PCI
The 32-bit Industio CP-114 Series board complies with the PCI specifications 2.1. Hardware