User`s manual

3-18 Industio CP-114 User's Manual

Configuring Board and Port

If you already have installed the driver and want to re-configure the COM number for the ports under

Windows 95/98, follow this procedure.

1. Open the [Control Panel], click on the [System] icon, select the [Device Manager] tab,

and then [MOXA Smartio/Industio multiport board]. Select the desired [CP-114

Series] entry, click on the [Properties] button and select the [Ports Configuration] tab.

2. Assign the desired COM number for the Industio CP-114 Series port mapping or FIFO settings,

detailed in the stage, “Port Configuration Stage”, of the previous section, “Installing

Driver”.

3. Restart the system to activate the latest configuration.