User`s manual

3-14 Industio CP-114 User's Manual
Port Configuration Stage
This stage displays the “CP-114 Series Installation” dialog box for the port configuration. Here
you can map the MOXA ports to the system COM numbers.
In the “CP-114 Series Installation” dialog box, the COM number field of the newly installed
board is set to default COM No. If necessary, you may select to change all the ports of the board
with the desired “COM Number”.
Note ! You may go directly to the next stage if you need not change any setting.
In the “CP-114 Series Installation” dialog box, select the desired port in the port list and click
[Port Setting] to enter the individual “Port #” setting dialog box to change the port number
mappings or FIFO settings.
l Port Number
You have to set up all the ports of the board with the desired “COM number”, which
should not conflict with other COM number in use. In this “Individual Port Setting” dialog