Manualshelf

User`s manual

ManualsBrandsMoxa Technologies ManualsComputer equipmentIndustio CP-114 Series CP-114 Series
21222324252627282930
3-10 Industio CP-114 User's Manual
The following flow chart illustrates the driver installation stages of the Industio CP-114 Series boards.
Each stage is detailed later.
See chapter “Hardware
Installation”
Yes
Driver installed before?
No
First Time Driver Installation Stage
This stage presents the steps for installing the driver for the very first time with the first Industio CP-114
Series board. The installation of the Industio CP-114 Series board for Windows 95 and Windows 98
differs slightly and will be described in two columns. Follow the steps in the left or right
column for Windows 95 or 98, respectively.
Install the Industio PCI board in the system
Start Windows 95/98 to detect the board
Install the driver with the diskette
See “First Time Driver Installation
Stage”
Configure the port
See “Port Configuration Stage”
The ports of the Industio CP-
ready to work.
See “Board and Port Ready Stage”